JY-1000C fully hydraulic core drill

Model:

Usage

The JULONG JY series fully hydraulic core drill rig is developed by our company based on the advanced technologies of similar drill rigs at home and abroad.
1. The drill rig uses a five-link mast and can use 2-meter drill rods.
2. The drill rig can perform mechanical two-speed and stepless speed regulation, with a maximum torque of 2600 N.m.
3. It uses an axial piston pump and an inclined axis piston motor drive.
4. It has a power head lateral shifting mechanism, and the mast uses a hydraulic cylinder for lifting and can slide as a whole, allowing for drilling within the 45-90° range.

Drilling Depth:

Machine weight:

Category：

Fully hydraulic core drilling rig

info@chinajulong.cn

Inquire immediately

Main features of the drilling rig:

　The JULONG JY series fully hydraulic core drilling rig is a new type of drilling rig developed by our company based on the advanced technology of similar drilling rigs at home and abroad. It is mainly suitable for drilling in solid ore deposits, and can also be used for engineering geology, shallow oil, natural gas, groundwater drilling, as well as for mine ventilation, drainage and dam grouting and other engineering drilling. The drilling rig adopts full hydraulic drive, the power head rotation adopts axial piston pump and inclined axis piston motor drive, mechanical two-speed plus stepless speed regulation, and advanced structure. The power head adopts a hydraulic cylinder chain speed increasing feed mechanism, the movement is stable and reliable, with a power head lateral shifting mechanism, the mast adopts a hydraulic cylinder lifting and can be slid as a whole, and can drill holes within the range of 45-90°. The hydraulic system adopts load-sensitive control, with high work efficiency and large torque. The drilling rig is equipped with a hydraulic trestle clamp, hydraulic leveling support legs, retractable mast and other devices, which facilitate the rapid positioning of the drilling rig. It is equipped with wireless remote control crawler, suitable for various terrains, and controls the crawling of the drilling rig within a safe distance to prevent sudden dangers.

Technical Parameters

Drilling Rig Model		JY-1000C
Drilling Capacity	BTW (m)	1200
	NTW (m)	1000
	HTW (m)	800
	NQ (m)	/
Hydraulic System	Rated Pressure Mpa	Main pump 115ml/r, 32MPa, auxiliary pump 96ml/r, 25MPa
Hydraulic System	Cooling Method	Air cooling + Water cooling
Engine Parameters	Model	Weichai six-cylinder
	Rated Power Kw	129
	Rated Speed rpm	2200
Power Head Parameters	Maximum Torque N.m	2600
	Maximum Speed rpm	1400
	Feeding Stroke m	2.5
	Lifting Force kN	360
	Thrust kN	180
Rope Core Winch Parameters	Rope Capacity m	1200
	Lifting Force kN	24
	Lifting Speed m/min	110
	Wire Rope Diameter mm	6
Mast Parameters	Overall Height/m	8
	Drilling Angle °	45-90
	Sliding Stroke mm	1200
Clamp Parameters		75/89/115
Crawler Parameters	Maximum Climbing Angle °	25
Crawler Parameters	Maximum Travel Speed km/h	2-3
Transportation Dimensions	*Length Width * Height mm**	550021002600
Overall Weight (t)		9