JY-1000B Full hydraulic core drilling rig

Model:

JY-1000B

Usage

It is mainly applicable to the drilling of solid deposits, can also be used for engineering geology, shallow oil, natural gas, groundwater drilling, and can also be used for tunnel ventilation, drainage and dam grouting and other engineering drilling.

Drilling Depth:

800-1400m

Machine weight:

8.8t

Category：

Fully hydraulic core drilling rig

info@chinajulong.cn

Inquire immediately

Feature

A. The drilling machine adopts full hydraulic drive mode and can use 3 meters drill pipe.
B. The rig can carry out mechanical two-gear plus stepless speed regulation, and the highest torque can reach 2600N.m.
C. Axial plunger pump and inclined shaft plunger motor drive.
D. With power head lateral translation mechanism, the mast can slip as a whole by cylinder lifting and landing, and can be drilled within the range of 45-90°.

Technical parameters

Drilling depth
BTW (m)	1400
NTW (m)	1200
HTW (m)	1000
PQ (m)	800
Hydraulic system
Rated pressure （Mpa)	Primary pump 115ml/r.32MPa Auxiliary pump 80ml/r.25MPa
Cooling method	Air cooling+ Water cooling
Diesel engine
Model	Weichai engine 6-cylinder 129kW
Rated power (Kw)	129
Rated speed (rpm)	2300
Drill head
Max.torque (N.m)	2600
Max.rotation speed (rpm)	1400
Stroke (m)	3.5
Lifting force (kN)	360
Feeding force (kN)	180
Wireline winch
Roller capactity(m)	1200
Lifing force (kN)	24
Lifting speed (m/min)	110
Rope dia. (mm)	8
Drill mast
Height(m)	8.5
Drilling angle	0-90
Slide stroke (mm)	1200
Pipe clamp
Max.through-hole dia. 146mm
Crawler chassis
Climb angle°	20
Max walking speed (km/h)	2
Mud pump
BW100
Transportation Dimension
LWH mm	560022003000
Machine weight（t）
8.8