JY-600Q Full hydraulic core drilling rig

Model:

JY-600Q

Usage

It is mainly applicable to the drilling of solid deposits, can also be used for engineering geology, shallow oil, natural gas, groundwater drilling, and can also be used for tunnel ventilation, drainage and dam grouting and other engineering drilling.

Drilling Depth:

400-650m

Machine weight:

Category：

Fully hydraulic core drilling rig

info@chinajulong.cn

Inquire immediately

Feature

A. The rig is driven by two Kubota diesel engines with full hydraulic drive.
B. The rig can carry out mechanical two-gear plus stepless speed regulation, and the maximum torque can reach 1200N.m.
C. Axial plunger pump and inclined shaft plunger motor drive.
D. With power head lateral translation mechanism, the mast can slip as a whole by cylinder lifting and landing, and can be drilled within the range of 45-90°.

Technical parameters

Drilling depth
BTW (m)	650
NTW (m)	600
HTW (m)	400
PQ (m)	/
Hydraulic system
Rated pressure （Mpa)	31.5+31.5+20+20
Cooling method	Water cooling
Diesel engine
Model	Kubota four cylinder
Rated power (Kw)	49.2*2
Rated speed (rpm)	2700
Drill head
Max.torque (N.m)	1200
Max.rotation speed (rpm)	1100
Stroke (m)	1800
Through hole diameter	95
Lifting force (kN)	100
Feeding force (kN)	75
Wireline winch
Roller capactity(m)	800
Lifing force (kN)	15
Lifting speed (m/min)	110
Rope dia. (mm)	6
Drill mast
Height(m)	5.8
Drilling angle	45-90
Slide stroke (mm)	/
Pipe clamp
Round hole 130mm
Machine weight（t）
5(Optional)